Part #:LPUXAY2D
© Copyright 2017, Universal Industrial Products, Inc.
SOSS
®
Door Hardware
Re-assemble the Stops
Using the 1/16" (1.59 mm) hex bit
re -assemble the stops into the order
shown in the illustration.
UltraLatch® is made in the U.S.A. of domestic and imported components.
Universal Industrial Products, Inc.
One Coreway Drive
Pioneer, OH, USA 43554-0628
Phone: (419) 737-2324 (800) 922-6957
FAX: (419) 737-2130
Email: [email protected] Internet: www.soss.com
2
5
Note
To switch to a right hand out swing application,
simply rotate the chassis 180 degrees and assemble
to the latch side unirose (part # LP22ALN or # LP22ALE)
as shown in the diagram.
6
Re-assemble Chassis to Latch Side Unirose
(Part # LP22ALN or # LP22ALE)
Using the #2 square drive or #2 phillips screwdriver
re-assemble the chassis to the latch side unirose as
shown in the diagram.
If this is a 2” door installation (L3) then you must
also reinstall the spacers between the Chassis and
Unirose at the 2 and 8 o’clock positions.
Lock Side Unirose
Latch Side Unirose
Stop Part # LPBAA4
2-Hole Retainer
Stop Part # LPBAA3
3-Hole Retainer
Spacer Locations
Fasten Here
Screw at
8 O’clock
Spacer for
2” Doors Only
Spacer for
2” Doors Only
Chassis faces
3 O’clock Position
Unirose Set Up for
Right Hand Door (Chassis Rotated 180°)
Screw at
2 O’clock
Part #
Stamp
Location
