GB / 4
5 / GB
OPERATING THE SoRoTo FORCED ACTION MIXER
Close the lid and lock it into place using the rubber strap. Start the mix-
er by pressing the green START button on the protective motor switch.
Pour the required material into the drum and add liquid.
The protective motor switch has a zero voltage releaser. In case of
power failure, the mixer must be restarted. For safety reasons, the
mixer will not start if the lid is open.
NOTE
Never put your hand or any object into the machine when the power is
connected.
When the material has reached the desired consistency and the mix-
ing motion is finished, the mixing drum is emptied by opening the mixer
gate. The drum should be emptied right after mixing. Please observe
that the material may set in the mixing drum, if left too long.
NOTE
The safety grid should be in front of the output gate at all times. If
the machine is jammed, e.g. by larger stones, ensure that the plug is
disconnected from the protective motor switch, before removing the ob-
struction. Do not put your fingers or any object through the mixer gate.
CLEANING / MAINTENANCE
Before cleaning the mixer, the plug must be removed from the socket.
Open the lid and lift the mixing blades off the axle. The mixer arms are
easily removed without using tools.
Firstly wash the mixer arms and the entire mixing drum using water.
When cleaning has ended, place the mixer arms onto the axle and
close the lid.
TRANSPORT
During transport of the SoRoTo Forced Action Mixer it is recommended
that the mixer be placed on the four wheels, and the lid is closed and
locked with the rubber strap.
SAFETY
When using an extension cable, please observe of the following,
• Never use a longer cable than necessary.
• Always use a cable with a minimum dimension of 1 mm
2
.
• Never use the cable when it is rolled up. Always roll it out completely.
When mixing materials that emit unpleasant or dangerous vapours
and/or dust, a dust liminator is recommended.
TECHNICAL DATA
Model 40L/30
Motor:
240V/110V - 0.75 kW – 50 Hz
W/L/H:
60*60*85 cm
Mixing capacity: 40 L.
Weight:
45 kg (empty).
LAeq< 75dB(A) with mortar.
Model 80L/30
Motor:
240V/110V - 1.1 kW – 50 Hz
W/L/H:
60*75*106 cm
Mixing capacity: 80 L.
Weight:
65 kg (empty).
LAeq< 75dB(A) with mortar.
