Power on:
Under the condition of power off, long press the
multifunctional button for 2 seconds,the blue light will flash for half a
second with voice prompt of “power on”,then the blue indicator light
will flash.
Power off:
Under the condition of power on,long press the
multifunctional button for 3 seconds,the blue light will shine for half a
second with voice prompt of “power off”,then the red indicator light
will shine for a second and off which means powered off.
Paring:
Under the condition of power off,long the press the
multifunctional for 3 seconds until the blue and red LED lights
flashing with the voice prompt of “pairing”,turn on the Bluetooth
function on the phone and search new devices,then paring the
“BH1521” on the list,the blue and red lights will stop crossing
flashing,only flashing with blue light after successful paring.
※
If stop pressing before cross flashing of blue and red light,it will
enter into the status of power on,it needs to turn off the headsets to
re-operation.
Answer phone calls:
when phone calls coming,shortly press the
multifunctional button and will go with the beep prompt sound.
Reject phone calls:
when phone calls coming,long press the
multifunctional button for 2 seconds and will go with the beep prompt
sound.
End calls:
when on the phone,shortly press the multifunctional
button and will go with the beep prompt sound.
Adjust the volume when on the phone:
every press on the volume
up or the volume down will increase or decrease the volume and it
will have the prompt sound when the volume up the maximum or
minimum.
Redial phone calls:
when standby or playing music,double press the
multifunctional button,the headsets will control the phone
automatically to dials out the phone number you dialed last and it will
go with the beep prompt sound.
Compatible to two phones:
The process is list below:
a.After successful connecting with first phone,turn off the Bluetooth of
the first phone.
b.After shutting down the headsets,reboot the headsets until the blue
and red LED lights cross flashing(long press the multifunctional
button for 5 seconds),enter into the status of paring again.
c.Turn on the Bluetooth of the second phone and search the new
device,connect the headsets follow the usual operation.
d.Turn on the Bluetooth of the first phone,starting to connect with the
headset again.
e.Then two phones are successfully connect with the headsets.
(tips:when connecting with two phones at the same time,it does not
mean that you can listen to the music from those two phones,it just
mean that those two phone playing music at the same time,one
phone will paused or the Bluetooth is turn off,the headsets will
connect with the other phone automatically.)
Operation(playing music
Playing music:
operate on the phone or media player(some phones
would start the music player automatically when connecting with
Bluetooth stereo devices)
Pause music:
When playing music,Click the multifunctional
button,the music will stop.
Play music:
(when paused the mucis)click the multifunctional button
again.
Volume up:
Every press on the “volume up button”will increase the
volume,it will have prompt sound when up to the max.
Volume down:
Every press on the “volume down button”will decrease
the volume,it will have prompt sound when down to the min.
Previous song:
long press the volume up button
Next song:
long press the volume down button
Answer phone calls when playing music: shortly press the
multifunctional button(the mucis will keep pausing)
End phone calls after answering when playing music:shortly press
the multifunctional button(the music will continue playing)
Dial numbers when playing music: double clicking on the
multifunctional button will dial the last calls before automatically(the
music will keep pausing)
The LED displays and relative prompt sound under kinds of
condition:
●
Power on:
The blue light will shine for one second
●
Power off:
The red light will shine for 1 second
●
Pairing:
The blue light and red light will shine alternately
●Standby(no connecting with the Bluetooth): The blue light will shine
every 2 seconds
●
Standby(connecting with Bluetooth):
The blue light will shine
twice every 3 seconds
●
When incoming calls:
The blue light flash quickly
●
When dialing:
The blue light flash quickly
●
When on the phone:
The blue light will shine twice every 3
seconds
●
When playing music:
The blue light will shine twice every 3
seconds
●
When charging:
The red light keep shining
●
Charging finished:
The blue light keep shining
●
When in low batter:
The red light will shine every 60 seconds and
with the beep prompt sound.
Remarks:
The headsets will power off without connecting with any phone in 8
minutes.
Pairing period:
3 minutes. It will exist the pairing mode without
connecting with any phone in 3 minutes.
Iphone battery display.
FCC Warning Statement
Changes or modifications not expressly approved by the party
responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: --Reorient or relocate the receiving
antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
注意：
1、双色双面印刷
2、三折页