21 of 32
2019-08-16
Instructions of use Mio Carbon (Design 2018)
3.6 Handling anti-tipper
activate:
The anti-tipper must always snap back into place when in its final position.
deaktivate:
Always turn the anti-tipper only 180° from the deactivated position to the active position. Avoid
fully turning in one direction, otherwise the tension spring inside the anti-tipper will be dama-
ged and the anti-tipper may lose its functionality.
In the case of leg amputations, a wheel base extension, or at least an anti-tipper should be used
to improve the tipping stability.
A wheel base extension is
not
a replacement for an anti-tipper.
3.6.1 General indications
180°
180°
(1)
(2)
(2a)
(1)
(2b)
