Instructions for use Jump alpha
9 of 48
2019-08-16
2 General information
-10 to + 41°C
30 - 70%
x
y
Do not use the footrest(s) for getting in
and out of
the wheelchair, The wheelchair
might tilt forward.
x >700 mm
y > x + 50 mm
!
2.3 General safety information
Before each use, check:
• the frame, back tubes, add-on parts and accessories for visible damage, bending, cracks
or missing or loose screws,
• the wheels and quick-release axles for tightness,
•
that the inflation pressure and tyre tread are sufficient,
• that the brakes are working properly,
• that the angle adjustment elements/ eccentric clamps are secure,
• that the seat plate/ back/ footrest are tightly locked,
• that the anti-tipper/seat and back belts are functioning correctly,
•
that all previously dismantled components have been reconnected and firmly locked.
There is a risk of injury (e.g. due to crushing) from all rotating, swivelling or foldable com-
ponents, even during adjustment and repair work and during transport.
Danger of tipping over and overturning
Occupants must only get in and out of the wheelchair with the wheel lock and anti-tipper engaged.
The risks listed as examples below may occur when dismantling the following parts/
accessories:
• Cushions: lack of hygiene / pressure points
• Headrest: loss or missing headrest during transport
• Driving wheels: loss of the back (use of wheelchair not possible)
