Instructions of use Dynamis TSD
33 of 36
2021-05-26
5 Technical data
Model: Dynamis TSD
Model: Dynamis TSD
HmVz-Nr.:
Type: 804
Dimensions ± 5%
Description
Maße
Bemerkung
Seat width (SW)
Ergo-seat
300 - 500 mm | in 20 mm Sch 40 mm mitwachsend
Seat depth (SD)
Ergo-seat
320 - 520 mm | in 20 mm Schritten
+ 20 mm mitwachsend
Back height (BH)
Underframe
430 oder 500 mm
Ergo-seat
400-650 mm | in 50 mm Schritten
Back unit:
in der Tiefe um +40/ -20 mm ver-
stellbar
Seat tilt
-3° bis 30°
Back angle
Preset
90° / 95° / 100°
Dynamic
vom voreingestellten Winkel bis zu 120°
Lower leg length
220-450 mm
Oberkante Sitzplatte bis Fußplatte
ETRTO wheel size
at 12"
Ø 267 mm (pannensicher)
310 mm luftbereift
ETRTO wheel size
at 16''
Ø 400 mm
ETRTO wheel size
at 20''
Ø 451 mm
ETRTO wheel size
at 22''
Ø 489 mm
ETRTO wheel size
at 24''
Ø 540 mm
Hand rim diameter
at 20''
Ø 444 mm
at 22''
Ø 481 mm
at 24''
Ø 533 mm
Hand rim
Ø 19 mm
Rohrdurchmesser
Camber
0° oder 2°
Seat height with horizontal
seat and a horizontal frame
Seat depth
320 - 340 mm
12": 475 - 515 mm
Seat depth
360 - 480 mm
12": 455 - 515 mm
16'': 475 - 535 mm
20'': 410-515 mm
22'': 430-540 mm
24'': 460-565 mm
Seat depth
500 - 520 mm
16'': 495 - 535 mm
20'': 430 - 515 mm
22'': 450 - 540 mm
24'': 480 - 565 mm
Overall width
min.
RB + 220 mm
max.
RB + 320 mm
overall length
min.
770 mm
Rahmengröße 1 | 12'' Hinterräder
max.
1200 mm
Rahmengröße 4 | 24 '' Hinterräder
Total height (including push
handle in 45° position)
min.
1170 mm
RH43 12'' Hinterräder
max.
1400 mm
RH50 24'' Hinterräder
Weight capacity
max.
90 kg
Permissible slope
12% = 7°
bei 0° Kantelung und 0° Neigung des Rü-
ckenwinkels
Permissible gradient
12% = 7°
Security against tipping
12% = 7°
Turning circle
ca. 1100 mm
abhängig von der Rollstuhlgröße
Individual weights
Wheels
1,2 - 2,2 kg
je nach Ausführung und Größe
Tyres
Commercially available pneumatic tyes (1 '' or 1 3/8 '' for 12 '') or soli tyres (same dimensions), tyre
pressure usually 3-10 bar.
Corrosion protection
Material
stainless steel, aluminum
Coating
powder coating, galvanizing
Service life
3 years
if the wheelchair is not used excessively
Lifespan
5 years
normative requirements
The wheelchair meets the requirements of ISO 7176-8 and the requirements against ignition
Empty weight min.
suitable for
driving with
RB 300 mm, 12''
wheels, 4'' cas-
ter wheels PU
24,85 kg
Frame size 1, seat frame, 12" wheels with drum
brakes, steering wheels, legrests, push bars.l
5.1 Data and measurements
