13
Operation
4
4
4.2 Menu sequence and menu structure
The graphics or overview mode ap-
pears when no key has been pressed
for 2 minutes, or when the main menu
is exited by pressing „esc“.
Pressing a key in graphics or overview
mode takes you directly to the main
menu. The following menu
items are then available for selection
there:
Current temperature values with
explanations (see 6.)
Function control of the system with
operating hours, etc. (see 7.)
Operating times for heating circuit and hot
water, setting the clock (see 8.)
Operating times for heating circuit and hot
water, manual mode (see 9.)
Set parameters for the heating circuit
(see 10.)
Anti-seizing protection, Frost prot.,
Anti-Legionella activation (see 11.)
Sensor calibration, Remote adjuster,
Mixer, etc. (see 12.)
Against unintentional setting changes
at critical points (see 13.)
For diagnosis in the event of an
error (see 14.)
Selection of the menu language
(see 15.)
