Sophos XG 750, Руководство по эксплуатации, Страница: 13 / 14

12 XG 750
Operating Instructions
Caution: The SFP GBIC and SFP+ ports use lasers to transmit signals over fiber optic
cable. The lasers are compliant with the requirements of a Class 1 Laser equipment
and are inherently eye-safe in normal operation. However, you should never look
directly at a transmit port when it is powered on. Always install appropriate and UL
approved Laser Class I Transceivers, rated 3.3Vdc, max. 1W, in the fiber ports before
using the fiber ports.
Installing a SFP GBIC module:
Please read the operation manual to the SFP GBIC module. Carefully insert the SFP
GBIC module into the port until it engages. The interface is immediately ready for use.
Removing a SFP GBIC module:
1. Remove the fiberglass cable from the module which you wish to remove.
2. Remove the module carefully from the port.
Depending on when you purchased your SFP GBIC module, it may have
any of three different release mechanisms: a plastic tab on the bottom
of the mini-GBIC, a wire bail, or a plastic collar around the mini-GBIC.
Please read the operation manual to the SFP GBIC module.
Serial Console
You can connect a serial console to the COM port of the Sophos hardware appliances.
You can use, for instance, the Hyperterminal terminal program which is included
with most versions of Microsoft Windows to log on to the appliance console. Use
the provided RJ45 to DB9 adapter cable to connect the console to your hardware
appliance.
The required connection settings are:
Ì
Bits per second: 38,400
Ì
Data bits: 8
Ì
Parity: N (none)
Ì
Stop bits: 1
Access via the serial console is activated by default on ttyS1. The connections of the
appliances and the respective functionality are listed in chapter “Operating Elements
and Connections.”