7
Soosan Hydraulic Pulverizer
Soosan Heavy Industries Co.,Ltd
3. Inspection before operating
1.1 Before starting the operation, place this pulverizer the concrete floor or
hard ground, make sure that the engine is stopped and then check the
following points.
A> Check if the bolts locking the pulverizer and hydraulic shovel connection pins are proper.
B> Check each part of the pulverizer for cracks and other damages.
C> Be sure to lubricate the pins, bushes and the other move parts.
The lubrication points are shown below.
Before install on the shovel, Lubricate at
①
. After install on the shovel, protrude the CYL's
Rod and Lubricate at
②
. Retract the CYL's Rod and Lubricate at
③
.
D> Recommended Lubricants
Maker
Lubricant
Cosmo
Grease Dynamax No. 2
Mobil
Mobil Mobilux 2
Shell
Alvania Grease 2
Esso
Esso Beacon 2
1.2 Start the engine and check the following points.
A> Move the control pedal to the UP or DOWN position form the neutral position to extend or retract
the hydraulic cylinder for checking of the external operation is proper and no oil leaks form the
joint of each hose.
B> Operate the pedal to move the pulverizer arm several times for checking if each movable part
moves smoothly.
CAUTION
GREASING
P
O
S
H
E
R
GREASING
GREASING
