Sony ZV-1F, Руководство пользователя

Страница: 54 / 298

Help Guide
Digital Camera
ZV-1F
Supplying power from a wall outlet (wall socket)
Use an AC adaptor, etc. to shoot and play back images while power is supplied from a wall outlet (wall socket). This
conserves the camera's battery power.
Note
As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor, etc.
Under certain conditions, power may be supplied from the battery pack supplementarily even if you are using the AC adaptor, etc.
Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the
camera will be turned off.
Only connect the USB cable to the camera or disconnect the USB cable from the camera while the camera is turned off.
Depending on the camera and battery temperature, the continuous recording time may be shortened while power is supplied
from a wall outlet (wall socket). The area around the terminal may become hot. Be careful when handling it.
When using a mobile charger as a power source, confirm that it is fully charged before use. Also, be careful of the remaining
power on the mobile charger during use.
Operation cannot be guaranteed with all external power supplies.
Related Topic
Inserting/removing the battery pack
5-041-856-11(1) Copyright 2022 Sony Corporation
Insert a sufficiently charged battery pack into the camera.
The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the
camera.
1
Connect the USB cable to the USB Type-C terminal on the camera.
2
Connect to a wall outlet (wall socket) using an AC adaptor, etc.
3
Turn on the camera.
An icon ( ) indicating that USB power is being supplied will appear on the monitor, and power supply will
start.
4
54