Sony ZRCT-100 Скачать руководство пользователя страница 13

Страница: 13 / 23

setting values for [Contrast] to [Color
Temperature Settings]. If necessary, change the
values for [Contrast] to [Color Temperature
Settings]. The setting values are identical for
each mode under factory default settings.

[Contrast]:

Use the slider and

buttons to adjust

the contrast.
Setting range: 0 to 100
Default value: 60

[Brightness]:

Use the slider and

buttons to

adjust the brightness.
Setting range: 0 to 100
Default value: 50

[Gamma]:

Select the gamma correction value.

Default value: 2.2

Caution

•

This product is not a medical device. The
device cannot be used for medical
examinations, even when [DICOM SIM] is
selected.

•

The [Gamma] settings will be disabled if
[HDR] is set to a setting other than [Off].

[HDR] (version 1.20.0 or later only):

Select the

playback mode for HDR (high dynamic range)
content.

•

[SMPTE ST 2084]

•

[S-Log3]

•

[Off]

[Color Space]:

Select the color space.

•

[Native]: Display the picture using the original
color space that is input.

•

[sRGB]: Display the picture using the sRGB
color space standard.

•

[AdobeRGB]: Display the picture using the
Adobe RGB color space standard.

•

[DCI] (before version 1.20.0 only): Display the
picture using the DCI color space standard.

•

[DCI_P3] (version 1.20.0 or later only):
Display the picture using the DCI color space
standard.

•

[BT.2020]: Display the picture using the
BT.2020 color space standard.

•

[Custom6] to [Custom10] (version 1.20.0 or
later only): Display pictures using a custom
color space.

Caution

[AdobeRGB], [DCI], and [BT.2020] do not
include the entirety of the color spaces defined by
their respective standards.

[Light Output] (version 1.20.0 or later only):

Select the output strength to use during low light-

source output. For details, refer to the Installation
Manual.

•

[Full]: Output at 100% strength.

•

[High]: Output at 75% strength.

•

[Medium]: Output at 50% strength.

•

[Low]: Output at 25% strength.

Caution

The [Light Output] setting will be disabled if
[HDR] is set to a setting other than [Off].

[Color Temperature Settings]:

Select the color

temperature in [Color Temperature].

•

If you selected [D93], [D65], or [D50], proceed
to step

•

If you selected [D93 Custom (Offset)], [D65
Custom (Offset)], or [D50 Custom (Offset)],
proceed to step

Configure the offset values.
These settings can only be configured when [Color
Temperature Settings] is set to “Custom (Offset)” in
step

Use the slider and

buttons to adjust the contrast.

Setting range: –128 to +127
Default value: 0

When you are finished configuring settings, click
[Close].

Содержание ZRCT-100
























Результаты поиска

Содержание ZRCT-100

Отзывы:

Бренды по названию

Популярные бренды

Sony ZRCT-100, Руководство по эксплуатации

Результаты поиска

Содержание ZRCT-100

Отзывы:

Бренды по названию

Популярные бренды