28
Error displays/Messages
RDS
The SEEK starts after a few seconds of
listening.
The station is non-TP or has weak signal.
t
Press
(TA)
repeatedly until “TA-OFF”
appears.
No traffic announcements.
• Activate “TA.”
• The station does not broadcast any traffic
announcements despite being TP.
t
Tune in another station.
PTY displays “--------.”
• The current station is not an RDS station.
• RDS data has not been received.
CD/MD playback
The sound skips.
Dirty or defective disc.
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
BLANK
*
1
No tracks have been recorded on an MD.*
2
t
Play an MD with recorded tracks on it.
ERROR
*
1
• A CD is dirty or inserted upside down.*
2
t
Clean or insert the CD correctly.
• An MD does not playback because of some
problem.*
2
t
Insert another MD.
• A CD/MD cannot play because of some
problem.
t
Insert another CD/MD.
FAILURE
The connection of speakers/amplifiers is
incorrect.
t
See the installation guide manual of this
model to check the connection.
HI TEMP
The ambient temperature is more than 50°C.
t
Wait until the temperature goes down
below 50°C.
NO DISC
No disc is inserted in the CD/MD unit.
t
Insert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
t
Insert the magazine in the CD/MD unit.
NO MUSIC
A CD which is not a music file is inserted in
the MP3 playable CD unit.
t
Insert a music CD in the MP3 playable CD
unit.
NOT READY
The lid of the MD unit is open or the MDs are
not inserted properly.
t
Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t
Check the connection. If the error
indication remains on in the display,
consult your nearest Sony dealer.
RESET
The CD/MD unit cannot be operated because
of some problem.
t
Press the RESET button on the unit.