background image

4

EN

Getting Started

Resetting the unit

Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object
such as a ball-point pen.

Front panel detached

Note

Pressing the reset button will erase the clock and some
memorized functions.

Detaching the front panel

You can detach the front panel of this unit to
prevent the unit from being stolen.

1

Press 

(OFF)

.

2

Press 

(OPEN)

 to open up the front panel,

then pull it off towards you.

Notes

• Do not put anything on the inner surface of the front

panel.

• Be sure not to drop the panel when detaching it from the

unit.

• If you detach the panel while the unit is still on, the

power will turn off automatically to prevent the speakers
from being damaged.

• When you carry the front panel with you, put it in the

supplied front panel case.

Attaching the front panel

Align the front panel with the unit, and push
in.

Notes

• Be sure not to attach the front panel upside down.
• Do not press the front panel hard against the unit when

attaching it. Press it lightly against the unit.

• Do not press hard or put excessive pressure on the

display of the front panel.

• Do not expose the front panel to direct sunlight, heat

sources such as hot air ducts, and do not leave it in a
humid place. Never leave it on the dashboard of a car
parked in direct sunlight where there may be a
considerable rise in temperature.

Caution alarm

If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch on the
bottom of the unit is set to the 

A

 position).

Preparing the rotary
remote

When you mount the rotary remote, attach the
label in the illustration below.

Reset button

SOUND

LIST

MODE

SOUND

LIST

MODE

Содержание XR-C750





























Отзывы: