Sony XR-C7200R, Руководство по эксплуатации

Страница: 19 / 140

19
EN
Locating a disc by name
— List-up (CD unit with custom file function
or MD unit)
You can use this function for the discs that
have been assigned a personalized name. For
more information on disc names, refer to
“Labeling a CD” (page 18).
1
Press (PTY/LIST) momentarily.
The names assigned to the disc currently
playing and the next disc to be played
appear in the display. The name assigned to
currently playing disc is flashing.
2
Press (PTY/LIST) repeatedly until you
find the desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• To go back to the normal display, press (DSPL) . Once a
disc name has been displayed for five seconds, the display
goes back to the normal playback mode.
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, “NO Disc” appears
in the display.
• If a disc has not been assigned a custom file, “ ******** ”
appears in the display.
• If the disc information has not been read by the unit, “?”
appears in the display. To load the disc, first press a
number button, then choose a disc that has not been
loaded.
• The information appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Selecting the specific
tracks for playback
— Bank/Custom File
(CD unit with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT) .
Then press (3) (PLAY MODE) for two
seconds.
L S T
4 SCHUBERT
ENTER
SUR EQ
Bank edit mode
Note
If you have not labeled the disc, the bank edit mode does not
appear and the programme edit mode appears. To go back
to the normal playback mode, press
(3) (PLAY MODE)
for two seconds.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press
(5) (ENTER).
The indication changes from “Play” to
“Skip.” If you want to return to “Play,”
press
(5) (ENTER) again.
3
Repeat step 2 to set the “Play” or “Skip”
mode on all the tracks.
4
Press (3) (PLAY MODE) for two seconds.
5
Press (SHIFT) .
Notes
• You can set the “Play” and “Skip” modes on up to 24
tracks.
• You cannot set the “Skip” mode on all the tracks.
Playing the specific tracks only
You can select:
• Bank on to play the tracks with the “Play”
setting.
• Bank inv (inverse) to play the tracks with the
“Skip” setting.
1
During playback, press (SHIFT) , then
press (3) (PLAY MODE) repeatedly until
“Bank” appears.
2
Press (4) ( n ) repeatedly until the
desired setting appears.
z
Bank on
z
Bank inv
z
Bank off
Playback starts from the track following the
current one.
3
Press (SHIFT) .
To go back to the normal playback mode,
select “Bank off” in step 2 above.
C D 1
2 2 Play
PLAY MODE ENTER
TRACK DISC
SUR EQ
C D 1
2 4 Skip
PLAY MODE ENTER
TRACK DISC
SUR EQ
C D 1
Bank on
PLAY MODE
BANK
SUR EQ
CD/MD Unit