12
EN
With Optional Equipment
CD/MD Unit
Playing a CD or MD
1
Press
(SOURCE)
repeatedly to select the
CD or MD.
2
Press
(MODE)
until the desired unit
indication appears in the display.
CD/MD playback starts.
Changing the displayed item
Each time you press
(DSPL)
during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name
*
1
$
Track name
*
2
$
Clock
*
1
If you have not labeled the CD, “NO Name” appears in
the display. If there is no prerecorded name for an MD,
“NO D. Name” appears in the display.
*
2
If the track name of an MD is not prerecorded, “NO T.
Name” appears in the display.
Tip
If the name of the MD is too long, you can scroll it across
the display by pressing
(SHIFT)
, then
(1)
(
N
).
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 10 characters and the Auto Scroll
function is on, the name automatically scrolls
on the display as follows.
• The disc name appears when the disc has changed (if the
disc name is selected).
• The track name appears when the track has changed (if
the track name is selected).
• The disc or track name appears depending on the setting
when you press
(SOURCE)
to select an MD.
If you press
(DSPL)
to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
1
Press
(SHIFT)
, then press
(2)
(SET UP)
repeatedly until “A. Scrl” appears.
2
Press
(4)
(
n
) to select “A. Scrl on.”
SEEK/AMS
To locate succeeding tracks
To locate preceding tracks
SEEK/AMS
To search forward
To search backward
3
Press
(SHIFT)
.
To cancel Auto Scroll, select “A. Scrl off” in
step 2 above.
Displaying the recording date of
the currently selected MD
Press
(DSPL)
for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS)
once for each track you wish
to skip.
Locating a specific point in a track
— Manual Search
During playback, press and hold either
side of
(SEEK/AMS)
. Release the button
when you have found the desired point.
Locating a disc by disc number
— Direct Disc Selection
Press the number button that
corresponds with the desired disc
number.
The desired disc in the currently selected
changer begins playback.
Scanning the tracks
— Intro Scan
You can play the first 10 seconds of all the
tracks on the current disc.
1
During playback, press
(SHIFT)
, then
press
(3)
(PLAY MODE) repeatedly until
“Intro” appears.
2
Press
(4)
(
n
) repeatedly until
“Intro on” appears.
Intro Scan starts.
3
Press
(SHIFT)
.
To go back to the normal playback mode,
select “Intro off” in step 2 above.
