Sony XR-C6120, Руководство по эксплуатации

Страница: 19 / 28

19
Locating a disc by name
— List-up (For a CD unit with the custom
file function or an MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 18).
1
Press
(LIST)
.
The name assigned to the current disc
appears in the display.
When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.
2
Press
(LIST)
repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL) .
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, “NO DISC”
appears in the display.
• If a disc has not been assigned a custom file,
“
********
” appears in the display.
• If the disc information has not been read by the
unit, “NOT READ” appears in the display. To load
a disc, first press the number button, then choose
the disc that has not been loaded.
• There are also some letters which cannot be
displayed (during MD or CD TEXT disc playback).
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When a personalized label is erased, the original
CD TEXT information will appear in the display.