– 20 –
FM Stereo Separation Adjustment
Setting:
SOURCE button: FM
FM RF signal
generator
Carrier frequency : 98.0 MHz
Output level
: 70 dB (3.2 mV)
Mode
: stereo
Modulation
: main: 1 kHz, 33.75 kHz deviation (45%)
sub: 1 kHz, 33.75 kHz deviation (45%)
19 kHz pilot: 7.5 kHz deviation (10%)
0.01
µ
F
set
antenna jack (J1)
+
–
LINE OUT (XR-C350)
SPEAKER OUT (XR-3750)
level meter
10 k
Ω
(XR-C350)
4
Ω
(XR-3750)
AM (MW) Auto Scan/Stop Level Adjustment
Setting:
SOURCE and MODE button: MW
AM RF signal
generator
Carrier frequency : 999 kHz
30% amplitude
modulation by
1 kHz signal
Output level
: 33 dB (44.7
µ
V)
(50
Ω
)
set
AM dummy antenna
30
Ω
15 pF
65 pF
antenna jack (J1)
Procedure:
1. Set to the test mode. (See page 18.)
2. Push the SOURCE button and set to FM.
3. Push the MODE button and set to MW.
Display
5. Adjust with the volume RV1 on TU1 so that the “MW” indi-
cation turns to “MWI” indication on the display window.
But, in case of already indicated “MWI”, turn the RV1 so that
put out light “I” indication and adjustment.
Display
4. Push the preset 3 button.
Display
Adjustment Location: See page 21.
Procedure:
FM Stereo
Level meter
Level meter
signal generator
connection
reading (dB)
output channel
L-CH
L-CH
A
B
R-CH
L-CH
Adjust RV4 on TU1
for minimum reading.
R-CH
R-CH
C
D
L-CH
R-CH
Adjust RV4 on TU1
for minimum reading.
L-CH Stereo separation:
A
-
B
R-CH Stereo separation:
C
-
D
The separations of both channels should be equal.
Specification: Separation more than 28dB
Adjustment Location: See page 21.
INTRO
999
3
SHUF1
MW
INTRO
999
3
SHUF1
MW
INTRO
999
SHUF1
