Sony XM-1ES, Руководство по эксплуатации, Страница: 8 / 100

8
GB
Parts for Installation and
Connection
This parts list does not include all the package
contents.
Installation
• Mount the amplifier either inside the trunk (boot)
or under a seat.
• For your safety, choose a mounting location that
will not interfere with any driving operations.
• Do not install the amplifier near the heater, in
areas that get exposed to direct sunlight or
subject to high temperature.
• Do not install the amplifier under a floor carpet,
where the heat dissipation from the amplifier will
be considerably impaired.
• Avoid installing the amplifier in areas subject to
rain, moisture, dust and dirt.
Mounting the amplifier
1
Place the amplifier on your selected
mounting location, then mark the position
of the 4 screw holes on a mounting board
(not supplied).
2
Drill a 3 mm ( 1 /
8
in) pilot hole at each mark
and mount the amplifier onto the board
with the mounting screws

.
The mounting screws

are 20 mm ( 13 /
16
in)
long, so make sure that the mounting board is
thicker than 20 mm (
13 /
16
in).
Installation and Connection

Mounting screw
(5 × 20 mm (
7 /
32
× 13 /
16
in)) (4)

Mounting bracket (1)

Securing screw
(2 × 5 mm (
3 /
32
× 7 /
32
in)) (2)

Mounting screw
(3 × 12 mm (
1 /
8
× 1 /
2
in)) (2)

Double-sided tape (1)

Hex key (2.5 mm ( 3 /
32
in)) (1)
Installing the Amplifier
