109
Setup Menu
Chap
te
r 7
Men
u
s
To change the settings of menu items
Proceed as follows to change the settings of menu items.
1
Use the PUSH SET knob to select the required item.
Example:
Screen display when item 005 DISPLAY
SEL is selected
2
Press the PUSH SET knob or the SELECT function
button (F2).
This displays the setting screen for the menu item
selected in step
1
.
Example:
Setting screen display when item 005
DISPLAY INFORMATION SELECT is selected
3
Use the PUSH SET knob or the +/– function button
(F3 or F4) to change the setting.
Turning the PUSH SET knob while holding down the
SHIFT button increases the increment of adjustment.
4
To change other settings, press the PUSH SET knob or
the RETURN function button (F1) to return to the
previous screen, then repeat steps
1
to
3.
5
When you have completed the settings, press the
SAVE function button (F5).
The message “NOW SAVING...” appears on the video
monitor screen, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor screen returns to its normal indications.
• If you power off the unit before a save operation is
completed, settings may be lost. Wait until the save is
completed before powering off the unit.
• If, instead of pressing the SAVE function button (F5),
you press the MENU button, the new settings are not
saved. The message “ABORT !” appears on the video
monitor screen for about 0.5 seconds, and the system
exits the menus. To change more than one setting, be
sure to press the SAVE function button (F5) after
making the settings.
To return menu settings to their factory
default settings
After changing menu settings, use the following procedure
to return the settings to their factory default settings
(setting initialization).
To return a particular setting to its factory default
setting
In the screen that selects the setting of that item, press the
RESET button.
For example, proceed as follows to return the 005
DISPLAY INFORMATION SELECT item to its default
setting. This assumes that the setting has been changed
from the factory default “time data & status” in step
3
of
the procedure in
“To change the settings of menu items”
.
1
Press the RESET button.
“time data & status” (factory default setting) is
selected.
2
Press the SAVE function button (F5).
The setting returned to its factory default is saved in
memory as the current setting.
Function buttons
F1 to F6
(The function to
be displayed
varies depending
on the situations.)
RETURN:
Goes up one level.
SELECT:
Selects an item.
UP:
Skips back 100 or 50 items in the
list of menu items.
DOWN:
Skips forward 100 or 50 items in
the list of menu items.
SAVE:
Saves a new setting to memory.
EXIT:
Exits the current menu.
–:
Changes a setting.
+:
Changes a setting.
RESET button
• Returns the current setting to the
factory default.
• Answers “No” to a question.
Menu control
buttons
Functions
Current setting
Current setting
Notes
