Sony XDP-PK1000, Руководство по эксплуатации

Страница: 16 / 52

16
To secure the cradle cable
To release the cradle cable
Note
• You should not reuse the cord clamp once it has
been removed as the adhesive strength will be
reduced.
Attaching an iPod/iPhone
Compatible iPod/iPhone models
See “About iPod/iPhone” (page 20) or visit
the support page:
http://esupport.sony.com
http://www.sony.com/mobileAV
Notes
• Start the car’s engine before connecting the
iPod/iPhone. Depending on the device,
malfunction or damage may occur if it is
connected before starting the engine.
• Remove the case or cover from the iPod/iPhone
before setting it in the cradle to ensure a stable
installation.
• Sony cannot accept responsibility in the event
that data recorded to an iPod/iPhone is lost or
damaged when using an iPod/iPhone
connected to the cradle.
• For details on environmental conditions for
operating the iPod/iPhone, check the website of
Apple Inc.
1
Push the PUSH RELEASE button to
stretch the arm of the cradle (

), and
then set the iPod/iPhone in the cradle
(

).
Notes
• When setting the iPod/iPhone, hold the
iPod/iPhone at the same angle as that of the
connector on the cradle.
• When setting the iPod/iPhone, hold the
cradle securely.