Sony XDCAM XDBK-J102, Руководство по установке

Страница: 26 / 28

1-18 (E)
XDJ-1000
1-13. Precautions for Relocation
When relocating this unit, perform the following procedure before relocation.
1. Press the
[RELEASE]
button on the front panel to release the BIN tray lock.
When the lock is released, the button indicator is lit solid.
2. Draw out the BIN tray and remove the disc on the BIN.
3. Slowly push the BIN tray all the way in to the library, and check that the
[RELEASE]
button light
goes off.
m
.
The BIN tray is not completely closed if the
[RELEASE]
button light is on.
.
The buzzer sounds an alert if the BIN tray is left open for three minutes or longer.
4. Press the power button.
The following screen is displayed on the LCD.
SHUTDOWN [Y/N]
Blinks.
5. Make “Y” blink using the arrow key, and then press the
[ENTER]
button.
After about 50 seconds, the LED of the power button changes to red to shutdown.
6. Attach the carrier shipping screws. (Refer to Section 1-7-1.)
7. Attach the shipping bracket of the BIN tray. (Refer to Section 1-7-3.)