Sony XDCAM PDW-HD1500, Руководство по установке

Страница: 13 / 22

1-5 (E)
PDW-HD1500 IM
Screw holes
PDW-HD1500 Left side view
1-5-2. Notes on Installation
c
To avoid an injury, do not install the unit on rickety table.
Ventilation and Installation Space for Servicing
. Do not block the air exhaust sections (rear panel) and the air vent (bottom of front side and both the
right and left sides).
.
Do not install the unit with the feet (four parts on the bottom) removed.
. In order to make a unit with good ventilation, ensure sufficient clearance around the unit.
. Be sure to provide 2 cm or more space to both the right and left sides and the top of the unit, and 25 cm
or more space behind the unit.
.
Do not install equipment on this unit.
n
Provide 2 cm or more space to both right and left sides of the unit. Providing 20 cm or more space above
the unit is recommended considering service operations.
Battery Adapter Attachment
When the unit is operated with a battery, be sure to use the following battery adapter and battery pack:
. Battery adapter: BKP-L551
. Battery pack: BP-GL95
BP-L80S
Attaching Position of the Battery Adapter
Install the battery adapter by screwing two screws into the holes on the left side of the unit.
Regarding installation, refer to the operation manual.