Ov
e
rvi
ew
4
System Components
The camera module imaging system comprises the following products.
Products
1
to
4
are used for the basic configuration, and
1
to
6
for the optional configuration. (All the products
except the camera module are available separately.)
1
Camera module
This is a small-size, high-resolution, camera
module using a CMOS sensor.
2
IEEE1394b camera cable (commercially
available)
Connect this cable to the IEEE1394b connector on
the rear panel of the camera module. The power and
image/control signals are transmitted through this
cable. To prevent a poor connection or damage to
the camera or cable, use the cable equipped with
fixing screws.
3
C-mount lens (commercially available)
Use an appropriate lens for the camera module and
usage.
4
Camera module interface board (commercially
available)
This is inserted in slots such as the PCI Express bus
or PCI bus of the host equipment (PC etc.)
Select an IEEE1394b interface board to match your
system.
5
DC-700/700CE camera adaptor (Sony)
Connect this adaptor to the camera module to
enable power supply from an ordinary AC power
source.
6
Camera cable (commercially available)
Connect this cable to the 8-pin I/O connector on the
rear panel of the camera module. The cable is used
for power supply and exchange of trigger signals.
For details about the suitable cable, please contact
your Sony Dealer.
1
2
3
4
5
6
