Sony XAV-602BT, Руководство по эксплуатации

Страница: 8 / 164

8
GB
Resetting the Unit
Before operating the unit for the first time, or after
replacing the car battery or changing connections,
you must reset the unit.
1
Press the reset button on the unit.
Use a pointed object, such as a ballpoint pen.
Note
Pressing the reset button will erase the clock setting
and some stored contents.
Performing Initial Settings
After resetting, the initial setting display appears.
1
Touch [No] on the demo setting display.
2
Touch [Language] to set the display
language.
Move the scrollbar up and down, then select the
desired language.
3
Touch [Subwoofer] to set the subwoofer
connection status.
Set to [ON] if a subwoofer is connected, or [OFF]
if not.
4
Touch [Listening Position] to set the
listening position.
Set to [Front L] if your listening position is front
left, or [Front R] if front right.
To return to the initial setting display, touch
.
5
Touch [OK].
The setting is complete.
This setting can then be further configured in the
setting menu (page 25).
Setting the Clock
1
Press HOME, then touch [Settings].
2
Touch , then touch [Date & Time].
3
Touch [Select Time Zone].
The setting display appears.
To return to the [Date & Time] display, touch
.
4
Touch [Set Date], then set the year,
month and day.
5
Touch [Set Time], then set the hour and
minute.
6
Touch [AM] or [PM].
7
Touch [OK].
The setting is complete.
To delete an entered number, touch [Clear].
For XAV-602BT
To activate/deactivate the CT function (page 12),
touch [CT] in step 4.
Preparing a BLUETOOTH Device
You can enjoy music, or perform handsfree calling,
by connecting a suitable BLUETOOTH device
(cellular phone, audio device, etc.). For details on
connecting a BLUETOOTH device, refer to the
operating instructions supplied with the device.
Before connecting, turn down the volume of this
unit; otherwise, loud sound may result.
When connecting a BLUETOOTH device for the first
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings].
2
Touch , and move the scrollbar up and
down.
3
Touch [Bluetooth Connection], then set
the signal to [ON].
The BLUETOOTH signal of this unit is activated
and
appears on the status bar.
4
Touch [Pairing >].
The unit enters pairing standby mode.
5
Perform the pairing procedure on the
BLUETOOTH device to detect this unit.
Getting Started
Pairing and connecting with a
BLUETOOTH device