Audio In
Sony Bus audio/controll terminal
Digital Audio Input(s)
-Ability to use all forms of USB devices may vary as not all devices are compatible.
This unit can be connected to the following Apple products, update your device with
the latest software before you use it.
-iPod Nano 1st generation*
-iPod Nano 2nd generation (aluminum)
-iPod Nano 3rd generation (video)
-iPod 5th generation (video)*
-iPod Classic
-iPod Touch
-iPhone
When you connect iPod Nano1st generation or iPod 5th generation, Passenger Control
is not available.
-This unit is compliant with MSC (Mass Storage Class) and MTP (Media Transfer Protocol)
type USB devices compliant with the USB standard.
-This unit cannot recognize USB devices via a USB hub.
If you have any questions or problems concerning your unit that are not covered in this
manual, consult your nearest Sony dealer.
Infrared Port
Wireless remote
Input(s)
USB, Sony BUS input, remote control terminal and parking brake input.
RCA Audio Output(s)
Front, Rear, and Subwoofer RCA pre-amp outputs
Remote Jack
Optional wired remote terminal
USB Port(s)
Rear USB - Full Speed
Power
Current Drain
3 - 8 amps
Input Power
12 V DC car battery (negative ground (earth))
Input Voltage
12 V DC car battery (negative ground)
Output Power
52W x4 High Power - 17 watts per channel minimum continuous average power into
4 Ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic
distortion.
Tuner
FM Usable Sensitivity
10 dBf
Frequency Response
FM: 20-15,000 Hz
S/N Ratio
70 dB (mono)
Selectivity
75 dB at 400 kHz
Stereo Separation
40 dB at 1 KHz
Video
Panel Type
TFT Active Matrix
Picture Modes
Normal, Wide, Full and Zoom
Resolution
800 x 480
Video Features
Color System
PAL / NTSC / SECAM / M-PAL
Display Technology
6.1" TFT Active Matrix LCD Color Monitor
Picture Mode
Normal, Wide, Full and Zoom
Weights and Measurements
Dimensions (Approx.)
178 x 100 x 173mm
Weight (Approx.)
2.2Kg
Supplied Accessories
