![background image](http://html.mh-extra.com/html/sony/wx-920bt/wx-920bt_operating-instructions-manual_1329677029.webp)
29
GB
E:\4699684111\4699684111WX920BTUC\01GB-WX-920BTUC\030CD.fm
masterpage: Right
WX-920BT
4-699-684-
11
(1)
Messages
The following messages may appear or flash during
operation.
INVALID
The selected operation could be invalid.
READ:
Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
(underscore):
The character cannot be
displayed.
For CD playback:
CD ERROR:
The disc cannot be played. The disc will
be ejected automatically.
Clean or insert the disc correctly, or make sure the
disc is not blank or defective.
CD NO DISC:
There is no disc.
Insert a disc containing playable files (page 24).
CD NO MUSIC:
There is no playable file. The disc
will be ejected automatically.
Insert a disc containing playable files (page 24).
CD PUSH EJECT:
The disc could not be ejected
properly.
Press
(eject).
or
:
The beginning or the end of the
disc has been reached.
For USB device playback:
HUB NO SUPPORT:
USB hubs are not supported.
IPOD STOP:
iPod playback has finished.
Operate your iPod/iPhone to start playback.
NOT SUPPORT ANDROID MODE
A USB device not supporting AOA (Android Open
Accessory) 2.0 is connected to the unit while [USB
MODE] is set to [ANDROID].
Set [USB MODE] to [MSC/MTP] (page 19).
USB ERROR:
The USB device cannot be played.
Connect the USB device again.
USB NO DEVICE:
A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC:
There is no playable file.
Connect a USB device containing playable files
(page 24).
USB NO SUPPORT:
The USB device is not
supported.
For details on the compatibility of your USB
device, visit the support site on the back cover.
USB OVERLOAD:
The USB device is overloaded.
Disconnect the USB device, then press SRC to
select another source.
The USB device has a fault, or an unsupported
device is connected.
For BLUETOOTH function:
BT AUDIO NO DEVICE:
The BLUETOOTH device is
not connected or recognized.
Make sure the BLUETOOTH device is securely
connected, or the BLUETOOTH connection is
established with the BLUETOOTH device.
FILE ERROR:
The selected operation could not be
performed.
Wait for a while, then try again.
NO SUPPORT:
The selected operation is not
allowed or supported.
Make sure the BLUETOOTH device is supporting
HFP (Handsfree Profile).
UNKNOWN:
A name or phone number cannot be
displayed.
WITHHELD:
The phone number is hidden by the
caller.
010COV.book Page 29 Wednesday, June 7, 2017 7:11 PM