Sony WRT-847B, Руководство по эксплуатации

Страница: 7 / 76

1
(GB)
English
English
GB
• The unit is designed for use in ambient temperature range
of 0°C to 50°C (32°F to 122°F).
• Do not place the unit on or near heat sources, such as
lighting equipment, power amplifiers, or in a place subject
to direct sunlight or excessive moisture. In such places,
the external finish or internal parts of the unit may be
damaged.
• If the unit is used in a very humid or dusty place or in a
place subject to expose to an active or corrasive gas, clean
its surface as well as the connectors with a dry, soft cloth
soon after use.
Lengthy use of the unit in such places or not cleaning it
after its use in such places may shorten its life.
• When cleaning the unit, never use organic solvents such as
thinners or benzine, which will damage the finish of the
unit.
• Using the unit with wet hands may cause trouble in the
unit.
• The unit has been factory adjusted precisely. Do not
tamper with its internal parts or attempt to repair it.
• Make sure to use two LR6 (size-AA) alkaline batteries.
• Make sure the poles of the batteries match the + and –
markings in the battery holder.
• Remove the batteries when the unit will not be used for a
long period of time.
• Do not attempt to recharge the alkaline batteries.
• Do not dispose of the batteries in fire. Do not disassemble
or short-circuit the batteries.
Precautions
Table of Contents
Precautions ................................................................ 1
Introduction ............................................................... 2
Features .......................................................... 2
Parts Identification .................................................... 4
Power Supply ............................................................ 7
Settings ...................................................................... 8
Initiating Setting Mode .................................. 8
Changing the Transmitting Channel .............. 9
Changing the Audio Gain Setting ................ 10
Resetting the Accumulated
Battery Use Time Indication .................. 11
Changing the Compander Time Constant .... 11
Changing the RF Output Power ................... 12
Troubleshooting ...................................................... 13
Specifications .......................................................... 15
Error Messages ....................................................... 16