Wireless Stereo Headset
WH-XB700
Pairing and connecting with other Bluetooth devices
The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the
headset for the first time.
Before you start the pairing operation, make sure that:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Hint
The above procedure is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Enter pairing mode on this headset.
Turn on the headset when you pair the headset with a device for the first time after you bought it or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.
When you pair a second or subsequent device (the headset has pairing information for other devices), press and
hold the
button for about 7 seconds.
Check that the indicator (blue) repeatedly flashes twice in a row. You will hear a voice guidance “Bluetooth pairing”.
1
Perform the pairing procedure on the Bluetooth device to search for this headset.
[WH-XB700] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step 1.
2
Select [WH-XB700] displayed on the screen of the Bluetooth device for pairing.
If Passkey (*) input is required, input “0000”.
3
A Passkey may be called “Passcode”, “PIN code”, or “Password”.
*
Make the Bluetooth connection from the Bluetooth device.
Some devices automatically connect with the headset when the pairing is complete. You will hear a voice guidance
“Bluetooth connected”.
4
60
