USB Connection (Windows)
Connecting this unit to a computer
1
Turn off the power of this unit.
2
Insert an SD card into the card slot of this
unit.
3
Connect this unit to a computer with the USB
cable (supplied).
Be careful of the orientation of the cable.
USB cable
(supplied)
4
Open [Computer] (or [My Computer] in
Windows XP) on the computer.
5
Confirm the newly recognized “Removable
disk (E:)*” icon on the screen.
You can now access the folders and files in the SD card.
* The drive name may differ from “(E:)”, depending on your
computer.
Notes
ˎ
Other USB devices cannot be used with this unit when it is
connected to a computer by USB.
To disconnect the USB cable
1
Confirm that access to this unit is finished.
2
Click
,
or
(Removing the hardware)
icon on the task tray at the bottom right of
the screen.
The device currently connected to the computer is displayed.
3
Click this unit.
4
Confirm the message “Safe to Remove
Hardware” and click [OK].
If using Windows 8, Windows 7 or Windows XP, you do not
need to click [OK].
5
Disconnect the USB cable from this unit.
Wireless LAN Connection (Windows)
Step1: Connecting for the first time
Notes
ˎ
When this unit (WG-C20) connects to a computer by wireless
LAN, the computer’s Internet connection is disconnected.
ˎ
To connect to the Internet, see the Help Guide.
ˎ
If this unit’s security has already been set, you need to enter
your password when connecting to your computer for the first
time. In this case, you do not have to set in Step2 and Step3.
1
Turn on the power of this unit.
2
Connect your computer to this unit.
Windows XP/Windows Vista
Right-click
on the task tray at the bottom right of the
screen.
Click [Available Networks/Connect to a network].
Select WG-C20-xxxxxx* and click [Connect].
Windows 7/Windows 8
Click
on the task tray at the bottom right of the screen.
Select WG-C20-xxxxxx* and click [Connect].
* “xxxxxx” is the last 6 digits of the MAC address.
Check the MAC address in “Identifying the Parts” in this Quick
Start Guide.
3
Confirm that the computer and this unit are
connected.
Notes
ˎ
When using Windows 7 or Windows 8, a warning message
may appear when connecting. You can proceed.
ˎ
Depending on the operating environment, it may take time
for this unit to connect to the computer.
Step2: Security set-up
I
mportant!
It is very important that you set up security before using a wireless
LAN device. If you do not set up security, other compatible devices
within transmission range can connect to this unit.
1
Confirm that the proxy setting of the web
browser is not set.
To cancel the proxy settings
Click [Tool]
[Internet Options]
[Connect]
[LAN
Settings] in the menu bar of Internet Explorer.
Uncheck [Use a Proxy Server for your LAN] of the proxy
server on the LAN settings screen.
To restore the proxy settings
Check [Use a Proxy Server for your LAN] of the proxy server on
the LAN settings screen and undo the settings associated
with it.
2
Enter the address “http://192.168.41.1/” into
the address bar of Internet Explorer.
3
Select [Settings] at the top right of the
screen.
4
Select the [Access control] tab.
5
Click [Owner].
6
Select [WPA2-PSK (AES)] in [Security
method].
7
Enter a personal password of at least 8
numbers or letters.
8
Reenter your password to confirm it and
select [Save].
9
The wireless LAN connection is turned off
when the password is set.
Step3: Reconnecting to the wireless LAN
1
Connect this unit.
Windows XP/Windows Vista
Right-click
on the task tray at the bottom right of the
screen.
Click [Available Networks/Connect to a network].
Select WG-C20-xxxxxx* and click [Connect].
Windows 7/Windows 8
Click
on the task tray at the bottom right of the screen.
Select WG-C20-xxxxxx* and click [Connect].
* “xxxxxx” is the last 6 digits of the MAC address.
Check the MAC address in “Identifying the Parts” in this Quick
Start Guide.
2
Enter your password.
Enter the password you set in Step2.
Confirm that the computer and this unit are connected.
From next time, you do not need to enter the password when
connecting to a device set up for this unit.
If an authentication error occurs:
The password may be wrong.
If you forget your password:
Press and hold down the Reset switch for about 10 seconds
to return to the default setting. Then set the password again
from Step1.
Step4: Accessing a file in this unit
When accessing an SD card
1
Insert the SD card into this unit.
2
Connect this unit to your computer by
wireless LAN.
3
Enter the address “\\192.168.41.1” into the
address bar of Internet Explorer.
The [SD_Card] folder is displayed. You can now read and write
the files in the SD card.
“Favorites” and “shortcut” are useful features.
To mark “\\192.168.41.1” as a Favorite, right click “Favorites” and
select “Add current location to Favorites”.
When accessing a USB device
1
Connect this unit to the USB device.
2
Connect this unit to your computer by
wireless LAN.
3
Enter the address “\\192.168.41.1” into the
address bar of Internet Explorer.
The [USB_Device] folder is displayed and you can read and
write files in the USB device.
The screen display may be subject to change.