Sony WG-C10 Series, Руководство пользователя

Страница: 263 / 313

Help Guide
How to use
Troubleshooting
Main unit
Charging
Supplying power
Wireless LAN connection
File operation
Supported memory cards
and devices
USB connection to a
computer
"PWS Manager"
Additional Information
Troubleshooting
Certified devices
List of Topics
Print
Portable Wireless Server
WG-C10
This unit does not supply power to other devices.
Make sure that the USB cable is connected correctly.
The air temperature may be outside the operating temperature range (0 °C to
35 °C (32 °F to 95 °F)).
Use this unit within this operating temperature range.
The remaining battery charge of this unit may be low.
Charge this unit.
The device to be supplied power is not ready for charging.
For details on how to charge the device, refer to its instruction manual.
You may be attempting to supply power while charging this unit. This unit
cannot supply power to other devices while charging.
Disconnect the USB cable from the USB microB port (for charging) before
supplying power.
The maximum output current of the USB port of this unit is 500 mA. If the
supply output current exceeds 500 mA, the power is stopped for safety.
Before supplying power to another device, be sure to check the voltage and
current ratings of the device.
If battery life is considerably short, even when the battery is fully charged, the
battery may have reached the end of its lifespan. (The lifespan of the battery
varies depending on usage conditions.)
Sony does not provide a service to replace an old battery with a new one.
Note
Correct operation is not assured if a USB hub or USB extension cable is used.
Go to Page Top
Related Topic
Supplying power to other devices
Charging from a computer
Charging with a USB AC adaptor
Go to Page Top
Back Back to Top
4-468-627-14(1)
© 2013 Sony Corporation
Notes on use
255
Search