|
52
To cancel the IC REPEAT
playback
Press REPEAT IC/A-B or
œ
•REPEAT during playback.
Notes
• When the IC REPEAT is set, the
battery consumption will quicken.
If you are not using the IC REPEAT
playback, change the display to “A-
B”.
• The IC REPEAT will automatically
cancel and start playback in 5
minutes.
• When using IC REPEAT function,
the sound turns to monaural.
• The IC REPEAT will not operate
during 1 track repeat playback.
• The IC REPEAT cannot be used on
the radio.
A-B Repeat Playback
Choosing a section you want to
repeat playback by pressing
REPEAT IC/A-B .
When the tape operation is
stopped, press REPEAT IC/A-B,
“A-B” appears in the display.
During playback press MENU
repeatedly to set the cursor to “IC.
REP” in the display. Press SET to
show “A-B”.
Repeat playback by pressing
REPEAT IC/A-B once at the
begining (A point) and once at the
end of the chosen section (B point).
To cancel the A-B REPEAT
playback
Press REPEAT IC/A-B or
œ
•REPEAT during playback.
Notes
• The A-B REPEAT function will not
operate at where the tape turns
over to the other side.
• The A-B REPEAT will not operate
during 1 track repeat playback.
• The A-B REPEAT cannot be used
on the radio.
Listening to the
Radio
1
Connect the supplied remote
control firmly to the
2
REMOTE jack and switch
the Hold function off.
2
Press BAND•RADIO ON to
turn on the radio.
3
Press and hold ASP until
“AREA” flashes in the
display. Then the FM
frequency and “PRESET 1”
will light up in the display of
the unit and “1” will light up
on the remote display.
4
Press BAND•RADIO ON to
select AM, FM or TV.
5
Press /– to select
the preset number you wish
to listen to and adjust the
volume using the volume
dial.
