WLA-NWB1K [GB] 3-196-849-12(1)
WLA-NWB1K [GB] 3-196-849-12(1)
1
Pairing with other Bluetooth devices
What is pairing?
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing
again, except in the following cases:
Pairing information is deleted after repair, etc.
This product is paired with 9 or more receiving devices.
This product can be paired with up to 8 Bluetooth device respectively.
If a new device is paired after 8 devices have been paired, the device
with the oldest connection time among the 8 paired devices is replaced
by the new one.
This product is initialized.
All pairing information is deleted (page 33).
Pairing transmitter with other Bluetooth receiving devices
1
Connect the transmitter to the Walkman (page 13).
The power of the transmitter turns on.
2
Press and hold the power button of the transmitter for about 2 seconds
to turn it off.
3
Place the transmitter and the Bluetooth receiving device to be
paired together within 1 m.
4
Set the Bluetooth receiving device to enter “Pairing in process.”
(See the operating instructions supplied with the Bluetooth receiving
device.)
Note
Passcode* of the transmitter is fixed at “0000.” Depending on the Bluetooth
receiving device, it may be necessary to input the passcode (in this case,
“0000”). The transmitter cannot be paired with a Bluetooth receiving device
whose passcode is not “0000.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
Advanced operation
Continued
