Sony Walkman PCM-M1, Руководство по обслуживанию

Страница: 21 / 46

— 21 —
7) NVRAM write error-code check: 99
The error which occurs during the normal operation mode, and t he mechanism mode when the error occurs can be checked. The error
code can be reset, too.
Saving the data in EEPROM and reset can be performed by pressing the LIGHT button.
The two digit mechanism mode code is displayed: The first digit indicates the present mode and the second digit indicates the next
mode.
When the present mode and the next mode are the same, it indicates that an error occurs.
When the present mode and the next mode are different, it indicates that an error occurs during transition from the present mode to the
next mode.
7. Error code table
* When position of rotary encoder cannot be detected, an error code is created in such a way that 0 is added in the top of the present
position number, and is displayed.
Code Contents
0 INITIAL CODE
1
×
1_FWD
2
×
3_FWD
3
×
4_FWD
4
×
25_FWD
5 REC
6 UNLOAD
7 EJECT
8 STOP
9
×
1_REV
A
×
3_REV
B
×
4_REV
C
×
25_REV
D FF
E REW
F PAUSE (FWD-PAUSE)
Block
Control motor (Rotary encoder)
Mechanism deck
Drum
Capstan
Reel
EEPROM
Code
00
01* ~ 0F*
10
11
12
13
14
15
20
21
30
31
40
41
90
91
92
Contents
No error.
Position cannot be detected.
Loading cannot be completed.
Unloading cannot be completed.
Eject does not take place.
T-side end sensor is defective.
S-side end sensor is defective.
Dew condensation.
Drum motor does not rotate.
Drum servo does not lock in.
Capstan motor does not rotate.
Capstan speed does not lock in.
T-reel FG cannot be detected.
S-reel FG cannot be detected.
B group data saving resulted in NG.
C group data saving resulted in NG.
B and C group data saving resulted in NG.
Present position
STOP ~ FWD
EJECT
CASS-IN ~ UNLOAD
FWD
LOADING-L
UNLOAD
FF-REW ~ STOP
Error code
01
02
03
05
06
07
08
Present position
STOP
EJECT ~ CASS-IN
CASS-IN
FF-REW
FWD ~ REV
LOADING-H
REV
Error code
09
0A
0B
0C
0D
0E
0F