Sony VPL-VW5000, Краткое руководство пользователя

Страница: 37 / 143

Error Handling
17
GB
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector.
If the indicator starts flashing in a way of other than the above, and the symptom persists even after carrying out the above methods, consult
with qualified Sony personnel.
Error Handling
About Indicators
Flashing/Lighting indicators The number of
flashes Cause and Remedy
Three times The unit does not light properly due to an abnormality of the light source and light
source power. Turn off, then turn on the power after a while.
If the symptom persists, consult qualified Sony personnel.
Six times The unit detects a drop impact.
If there is abnormality on the unit, consult with qualified Sony personnel.
If there are no abnormalities on the unit, disconnect the AC power cord and check
that the ON/STANDBY indicator turns off, then connect the AC power cord and
turn the unit on.
Eight times The lens is not securely attached.
Twice The internal temperature is unusually high. Check to ensure that nothing is blocking
the ventilation holes and the unit is not being used at high altitudes.
Note
ON/STANDBY
indicator WARNING
indicator
(Flashes in red) (Lights in red)
(Flashes in red) (Flashes in red)
Both indicators flash
If there is any problem or an error message appears on the screen,
refer to “Error Handling” in the Operating Instructions contained
in the supplied CD-ROM.