background image

15

Watching 3D Video 
Images

You can enjoy powerful 3D video images, 
such as from 3D games and 3D Blu-ray 
Discs, using the optional Active 3D Glasses 
(TDG-BT500A).

1

Turn on the HDMI equipment for 3D 
compatibility connected to the unit, 
then play the 3D content.

For details on how to play 3D content, 
refer to the operating instructions for the 
connected equipment.

2

Turn on the unit and project the 3D 
video image onto the screen.

For details on how to project the image, 
see “Projecting the Picture” (page 14).

3

Turn on the 3D glasses, and then put 
them on so that they fit comfortably.

For details on how to use the 3D glasses, 
see “Using the 3D Glasses” (page 15).

Tips

• The factory default setting for ”2D-3D 

Display Sel.” is “Auto” to allow projecting 
3D video images automatically when the unit 
detects 3D signals.

• To convert 3D video images to 2D video 

images, set “2D-3D Display Sel.” to “2D” 
(page 35).

• It may not be possible to display 3D video 

image, depending on the type of signal. Set 
the “2D-3D Display Sel.” to “3D,” and “3D 
Format” to “Side-by-Side” or “Over-Under” 
to suit the format of the 3D content you want 
to watch (page 35).

• Use the 3D glasses within the 

communication range (page 15).

• There are differences in perception of 3D 

video images among individuals.

• When the temperature of the usage 

environment is low, the 3D effect may be 
diminished.

Adjusting/Setting the 3D functions

You can adjust/set the 3D functions by 
pressing the 3D button on the remote control 
or with the “3D Settings” of the Function 

  

menu. For details, see “3D Settings” 
(page 35).

1

Turn on the 3D glasses, and register 
them on the unit.

For details on how to register the 3D 
glasses, refer to the operating 
instructions supplied with the 3D 
glasses.

2

Put on the 3D glasses.

3

Turn toward the screen.

Precautions for use

Misoperation may occur if:
• The viewing position is too far from the 

projector 

• There are other communication devices, 

such as a wireless LAN (IEEE802.11 b/g/
n) or a microwave with a bandwidth of 2.4 
GHz, near the unit

3D glasses communication range

Figure below indicate the communication 
range of the 3D glasses. If you try to watch 
3D video images from a distance greater 
than the communication range or install the 
unit outside the communication range, the 
3D glasses may not be able to display the 
images properly. Also, the distance varies 
depending on the environment of the room 
and installation environment of the unit.

Notes

Using the 3D Glasses

Содержание VPL-VW360ES











































































Отзывы: