30
Setup Menu
Network Management
On:
Set when connected to the network and continuously
communicating with the projector control equipment.
When Network Management is set to “On,” the network function is
continuously enabled. Set Network Management to “Off” for normal
use. If you set to “On,” the power consumption increases.
Power Saving
Sets the power saving mode.
Standby:
If no signal is input for 10 minutes, power is turned off
automatically and the projector goes into standby mode.
Off:
Disables the power saving function.
Lamp Setting
When replacing the lamps, set the desired lamp setting
(page 47).
Setting items
Description
Note