36
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_
VPLVW200UC\06PRO.fm
masterpage:Left
VPL-VW200
3-275-583-
13
(1)
Using the Supplied Software to Adjust the
Picture Quality (ImageDirector3)
By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired
gamma correction from a computer connected to the projector. Connect the REMOTE or
the NETWORK connector of the projector with a computer and start-up
“ImageDirector3” on the computer.
For details on how to use the “ImageDirector3”, refer to the Help within the CD-ROM.
• You need to install the “ImageDirector3” on a computer beforehand.
• When connecting the REMOTE connector or the NETWORK connector with a
computer, connect while the power of the computer and the projector are off.
2
Press
M
/
m
to select “Position” or
“Range,” and specify it more
delicate color position and color
range you want to adjust using
<
/
,
.
4
Adjust the color of the specified
portions.
Press
M
/
m
to select “RCP Color” or
“RCP Hue,” then adjust the color or
hue of the portions selected in step 3 to
suit your taste using
<
/
,
while
watching the projected picture. The
picture is returned to normal color
during adjustment.
5
After the adjustment is
complete, press
.
The RCP window disappears and the
picture of step 2 is appeared. Then
after a few seconds, normal picture is
restored.
Tip
There are some limitations on selection of
position and range.
Notes
