39
GB
Preparing
The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug the AC power cord into a wall outlet.
2
Turn on the projector.
Press the
/
key on the main unit or the
key
on the Remote Commander.
3
Press the MENU key to display the menu.
If the display cannot be properly seen, adjust
the focus, size, and position of the projected
image (page 42).
4
Select the menu language.
Press the
or
key to select the Operation
(
) menu then press the ENTER key.
Press the
or
key to select “Language
(
)” then press the ENTER key.
Press the
/
/
/
key to select a
language, then press the ENTER key.
5
Press the MENU key to turn off the menu
screen.
Selecting the Menu Language
1
3
2