Sony VPL-FHZ101L, Руководство по эксплуатации

Страница: 6 / 64

6
Remote Commander and Control Panel
Remote Commander
Control Panel

Infrared transmitter
 
(On) key/

(Standby) key
Turns on the projector or enters the standby
mode.

INPUT key
Selecting an input signal (page 16).

TWIN (Twin Picture) key
You can project the images from two input
signals on the screen as a main picture and
subpicture at the same time (page 22).

PICTURE MODE key
Changes the picture quality mode.
When “Intelligent Setting” in the Projection Setting
menu is set to “On,” “Picture Mode” cannot be set
(page 24).

MENU key/ENTER key/

/

/

/

(arrow)
keys/RETURN key/RESET key
Operating a menu (page 23).

FOCUS key
Use this key when attaching the electric focus
lens (page 17).
ZOOM key
Use this key when attaching the electric zoom
lens (page 17).
LENS SHIFT/SHIFT key/PATTERN key/
KEYSTONE key
Use this key when adjusting the projected
image (page 17).

POSITION (Picture Position) key
You can store up to six combinations of lens
settings (focus, picture size (Zoom), picture
position (Lens shift)) (page 21).

ASPECT key
Changes the aspect ratio of the projected
image (page 28).

APA (Auto Pixel Alignment) key
Automatically adjusts a picture to its clearest
while a signal from a computer is input via the
RGB input terminal (INPUT A, INPUT B). You
can cancel the adjustment by pressing the
APA key again while adjusting.

D ZOOM (Digital Zoom) key
Enlarges a part of the image while projecting
(page 22).

FREEZE key
Pauses a projected image. Press again to
restore the image. Use this key when inputting
a computer signal.
Note