31
The INSTALL SETTING Menu
A
d
ju
s
tm
e
nt
s an
d Set
tin
g
s
U
s
in
g a M
enu
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
Input-A
V Key s t o n e :
0
I m a g e F l i p :
O f f
B a ck g ro u n d : B l u e
L a m p M o d e :
S t a n d a rd
H i g h A l t i t u d e M o d e : O f f
S e c u r i t y L o ck :
O f f
Setting items
Functions
Initial setting
V Keystone
Corrects the trapezoidal distortion caused by the projection
angle using the
v
/
V
/
b
/
B
keys on the Remote Commander.
When the bottom of the trapezoid is longer than the top
: Sets a lower value.
When the top of the trapezoid is longer than the bottom
: Sets a higher value.
0
Image Flip
Flips the image on the screen horizontally and/or vertically.
•
Off:
The image does not flip.
•
HV:
Flips the image horizontally and vertically.
•
H:
Flips the image horizontally.
•
V:
Flips the image vertically.
Off
Background
Selects the background color of the screen when no signal
is input to the projector. Select “Black” or “Blue.”
Normally, set to “Blue.”
This setting becomes effective when the menu is cleared
after setting of the background color.
Blue
Lamp Mode
Sets the lamp brightness used during the projection.
•
High:
Illuminates the projected image brightly.
•
Standard:
Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
High Altitude
Mode
Set to “On” when the projector is used at an altitude of
1,500 m or higher.
Off
Security Lock
Turns on the projector’s security lock function.
When set to “On,” turns on the security lock function,
which locks the projector once a password has been set.
For details, see “Security Lock” on page 20.
Off
