Sony VPL CX85 - XGA LCD Projector, Руководство по эксплуатации

Страница: 22 / 192

GB 22
Connecting the Projector
This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
1
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2
Video cable (not supplied) or S-Video cable
(not supplied)
To connect to a video GBR/
Component output
1
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2
SMF-402 Signal Cable
(not supplied)
HD D-sub 15-pin (male)
↔
3
×
phono jack
• Set the aspect ratio using “Wide Mode” in
the INPUT SETTING menu according to the
input signal.
• When you connect the projector to a video
GBR or component output connector, select
“Video GBR” or “Component” with the
“Input-A Signal Sel.” setting in the SET
SETTING menu.
• Use the composite sync signal when you
input the external sync signal from video
GBR/component equipment.
Connecting with a VCR
VIDEO S VIDEO AUDIO
AUDIO
AUDIO MONITOR
INPUT A
VIDEO IN
OUTPUT
INPUT B
REMOTE RS-232C
2 1
VCR
to S
video
output
Right side
to audio
output
(R)
to video
output
to audio
output (L)
Notes
VIDEO S VIDEO AUDIO
AUDIO
AUDIO MONITOR
INPUT A
VIDEO IN
OUTPUT
INPUT B
REMOTE RS-232C
2 1
Right side
to
audio
output
(R)
VCR
to video
GBR/
component
output
to
audio
output
(L)