Sony VPL BW7 - 3 LCD Digital Projector, Руководство по эксплуатации

Страница: 42 / 324

GB
42
INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING Input-A
V Key s t o n e : Au t o
I m a g e F l i p : O f f
B a ck g ro u n d : B l u e
L a m p M o d e :
S t a n d a rd
H i g h A l t i t u d e M o d e : O f f
S t a n d by M o d e :
L ow
Setting items Functions Initial setting
V Keystone
Corrects the trapezoidal distortion caused by the
projection angle.
Select “Auto” for automatic correction, or “Manual” for
manual correction using the
M / m / < / , buttons.
When the bottom of the trapezoid is longer than the
top : Sets a lower value.
When the top of the trapezoid is longer than the
bottom : Sets a higher value.
Auto
Image Flip
Flips the image on the screen horizontally and/or
vertically.
HV:
Flips the image horizontally and vertically.
H: Flips the image horizontally.
V: Flips the image vertically.
Off: The image does not flip.
Off
Background
Selects the background color of the screen when no
signal is input.
Select “Black” or “Blue.” Normally, set to “Blue.”
Blue
Lamp Mode
Sets the lamp brightness used during the projection.
High:
Illuminates the projected image brightly.
Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
High Altitude
Mode
Set to “On” when the projector is used at an altitude
of 1,500 m or higher. Off
Standby Mode Lowers the power consumption in Standby Mode.
Select “Low” to lower power consumption during standby.
Low