VPCS1 Series Optical Disk Drive
Replacement Instructions
P/N 989201343
Rev. B
3/4
Note:
Identify tabs on the bezel and tab
holes located on the ODD.
.
Step 13.
Align the tabs on the bezel
with the tab holes located on the ODD.
Carefully press the bezel into place.
Step 14.
Position the new ODD
(Label side down) and identify the
correct bracket with the correct side to
be secured.
Notice the different shape
of each bracket and the alignment of
the Bracket and ODD screw holes.
Step 15.
Using the ODD screws, install
the ODD Brackets onto the new ODD.
NOTE:
After installation,
a
ll brackets
should sit flush. The stamped letters
located on the brackets should all be
facing the same direction.
.
ODD Installation
(Steps 16-20)
Step 16.
Align the ODD properly and
fully slide into the computer.
Step 17.
Ensure that the new ODD is
seated flush on the edge of the
computer.
Step 18.
Reinstall the two (2) ODD Bay
screws to secure the ODD.
Step 19.
Re-attach the Hard Drive Door
by sliding it towards the unit.
R
B
