background image

204

n

N

Troubleshooting

Speakers

Why won't my speakers work? 

Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound.

Your speakers may not be designed for computer use.

If the speakers have a muting button, set the button to off.

If the speakers have a volume control, make sure the volume is turned up loud enough to hear sound.

If you have connected an audio cable to the Headphones jack, disconnect the cable and use the speaker cable that was 
supplied with the speakers.

If you are using battery power, make sure the battery is installed properly and is charged.

If the speakers require external power, make sure the speakers are connected to a power source. See the manual that 
came with the speakers for more information.

 

Why can't I hear sound from my speakers? 

If the computer is using battery power, make sure the battery is properly installed and is charged.

If you are using a program that has its own volume control, make sure the volume control is properly set. See that 
program's help file for more information.

The speaker volume may be turned off, the volume setting may be too low, or the audio option may be disabled. 

Check the volume controls in Windows.

If Audio/Modem is disabled on VAIO Power Management power scheme settings, enable the option. See Activating 
VAIO Power Management Power Schemes 

(page 141)

 for the procedure.

  

Содержание VGN-SZ1HP/B



























































































































































































































Отзывы: