Sony VGN-FS115B Скачать руководство пользователя страница 137

Страница: 137 / 140

137

Precautions

On using the battery pack

❑

Never leave the battery pack in temperatures above 60°C (140°F), such as in a car parked in the sun or under direct sunlight.

❑

Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.

❑

Charge the batteries at temperatures between 10°C to 30°C (18°F to 86°F). Lower temperatures require a longer charging time.

❑

While the battery is in use or being discharged, the battery pack heats up. This is normal and is not cause for concern.

❑

Keep the battery pack away from all sources of heat.

❑

Keep the battery pack dry.

❑

Do not open or try to disassemble the battery pack.

❑

Do not expose the battery pack to any mechanical shock.

❑

If you are not using the computer for an extended period of time, remove the battery pack from the computer to prevent damage
to the battery.

❑

If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching the end of its life and should
be replaced.

❑

You do not need to discharge the battery before recharging.

❑

If you have not used the battery pack for a considerable amount of time, recharge the battery.

Содержание VGN-FS115B













































































































































Результаты поиска

Содержание VGN-FS115B

Отзывы:

Похожие инструкции для VGN-FS115B

Бренды по названию

Популярные бренды

Sony VGN-FS115B, Руководство пользователя

Результаты поиска

Содержание VGN-FS115B

Отзывы:

Похожие инструкции для VGN-FS115B

Бренды по названию

Популярные бренды