VGN-CS Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 994659900
Rev. A
2/2
Step 4.
To remove the hard drive
access cover slide the cover as
shown above .
Step 5.
Using the enclosed
magnetic screwdriver,
remove
the
one (1) screw securing the hard
drive assembly.
(HDD must be disconnected)
Step 6.
Locate the black plastic tab
on the hard drive assembly and
gently pull the original hard drive in
the direction shown above.
Step 7.
Once the hard drive
assembly is disconnected from the
connector carefully lift the hard drive
assembly to remove from hard drive
bay.
(HDD Reinstallation) Steps 8-11)
Step 8.
Initiate hard drive re-
installation by sliding the hard drive
assembly back into the hard drive
bay.
Step 9.
Once hard drive is properly
sitting its bay, carefully re-connect
the hard drive to the connector by
sliding the hard drive in the
direction shown above.
Step 10.
Reinstall the one screw
previously removed.
Step 11.
Reinstall the hard drive
cover by sliding the cover in the
direction shown above and tighten
the two (2) screws previously
removed.
Step 12.
Reinstall the Battery
Pack. Reconnect the AC Adapter.
(Power on your computer and
continue with the recovery process by
following the instructions described on
the back of the recovery disk’s case.)
Step 13.
Return the old HDD to
Sony following the included
shipping instructions.
