Sony VGN-CS1 Скачать руководство пользователя страница 173

Страница: 173 / 190

Troubleshooting

Microphone

What should I do if my microphone does not work?

❑

If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the
microphone jack on your computer.

❑

Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps:

Close all open programs.

Click

Start

and

Control Panel

Click

Hardware and Sound

Click

Manage audio devices

under

Sound

On the

Recording

tab, select the desired device for sound input and click

Set Default

How can I prevent microphone feedback?

Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker.

To prevent this problem:

❑

Keep the microphone away from a sound output device.

❑

Turn down the volume of the speakers and the microphone.

Содержание VGN-CS1































































































































































































Результаты поиска

Содержание VGN-CS1

Отзывы:

Sony VGN-CS1, Руководство пользователя, Страница: 173 / 190

Результаты поиска

Содержание VGN-CS1

Отзывы: