Installing a memory module
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2.
Unplug your computer and any peripheral devices.
3.
Gently place the unit on its side and remove the side panel. See
About Opening the Computer
If necessary, remove any cables, add-on cards, or other components to access the memory module slots.
4.
Remove the memory module from its anti-static package, handling it by the the edges.
5.
Locate the notch on the bottom edge of the module and align it over the open memory slot.
6.
Firmly insert the bottom edge of the memory module into the slot.
7.
Press down evenly against the module's upper corners. The end latches snap into position, holding the module
in place.
To avoid damaging a memory module slot, move the end latches slightly outward to relieve pressure.
The module clicks into place.
8.
Reinstall any components or add-on cards you may have removed.
9.
Replace the side panel. See
About Closing the Computer
.
Page 194
Содержание VGC-RA810G
Страница 11: ...Page 11 ...
Страница 31: ...Page 31 ...
Страница 65: ...Logs off from this computer or enables you to switch users Page 65 ...
Страница 161: ...Page 161 ...