Sony VGC-LS30, Руководство пользователя

Страница: 140 / 171

140 n N
Troubleshooting
What should I do if I cannot play a disc properly on my computer?
❑
Make sure the disc is inserted into the optical disc drive with the label side facing toward you.
❑
Make sure the necessary program(s) is installed according to the manufacturer's instructions.
❑
If a disc is dirty or damaged, your computer will stop responding. Follow these steps:
1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
2 Remove the disc from the optical disc drive.
3 Check the disc for dirt or damage. If you need to clean the disc, see On Handling Discs (page 117) for instructions.
❑
If you are playing a disc and cannot hear sound, do any of the following:
❑
Check if the volume is turned off or minimized by the muting or volume button, respectively, on the wireless keyboard
or the remote commander.
❑
Right-click the volume icon on the taskbar and click Open Volume Mixer to check the settings.
❑
Check the volume setting in the audio mixer.
❑
If you are using external speakers, check the volume settings on the speakers and the connections between the
speakers and your computer.
❑
Make sure the correct driver software is installed. Follow these steps:
1 Click Start and Control Panel.
2 Click System and Maintenance.
3 Click System.
4 Click Device Manager on the left pane.
The Device Manager window appears with a listing of your computer's hardware devices.
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the
drivers.