Sony VAIO VGN-S380 Скачать руководство пользователя страница 27

Страница: 27 / 223

Inserting a battery

To insert a battery

Turn the computer over, and slide the

UNLOCK/LOCK

latch on the bottom of the battery to the

UNLOCK

position.

Align the grooves on the battery with the tabs on the back of the computer.

The bottom panel illustrations may vary slightly from the actual computer.

Inserting the Battery

Slide the battery into the computer until it clicks into place.

Slide the

UNLOCK/LOCK

latch into the

LOCK

position.

Locking the Battery

Connect the AC adapter to the computer. See

To connect the AC adapter

If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the computer

with the port replicator attached could cause a temporary loss of power.

Some programs and peripheral devices prevent the system from automatically entering Hibernate mode. If you are using
battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See

Using power

saving modes

for more information.

Page 27

Содержание VAIO VGN-S380
































































































































































































































Результаты поиска

Содержание VAIO VGN-S380

Отзывы:

Sony VAIO VGN-S380, Руководство пользователя, Страница: 27 / 223

Результаты поиска

Содержание VAIO VGN-S380

Отзывы: